優點：無味無嗅，超光滑表面能徹底的清潔和充分排水

抗化學性：耐中等強酸堿，幾乎耐所有的非溶劑性化學藥品

物理特性：透明清晰，輕巧柔和，方便安裝

溫度范圍： -49 至 165°F（-45 至 74°C）

符合標準：FDA、3-A、NSF 51

不含BPA和鄰苯二甲酸酯

mie菌：環氧乙烷mie菌,或在溫度為 250 ℉ (121°C)、壓強為 15 psi (1 bar)條件下高溫高壓mie菌 30 分鐘

典型應用:

專為輸送各種飲料包括軟性飲料、果汁、香茶和瓶裝水而設計。不會影響其輸送產品的口感和香味，其出色的超光滑表面有助于排水，并可以進行簡單的沖洗。

Tygon飲料管固有的各種獨特性能同樣適用于各種復雜場合，包括從精細化妝品生產到出版行業中的水性油墨輸送。Tygon飲料管憑借其多功能性和經實踐證明的性能，已經成為當前廣泛被指定應用的透明柔韌塑料管。

物理特性：

Durometer Hardness Shore A (Shore D)	66
Tensile Strength Psi (Mpa)	2200 (15.2)
Ultimate Elongation	390
Tear Resistance, Ib-f/in (kN/m)	250 (43.8)
Specific Gravity	1.2
Water Absorption	0.22
Compression Set Constant Deflection	59
Minimum Recommended Operating Temp °F (°C)	-49 (-45)
Maximum Recommended Operating Temp °F (°C)	165 (74)
Brittleness by Impact Temp °F (°C)	-32 (-36)
Low Temp Flexibility °F (°C)	-49 (-45)
Tensile stress at 200% Elongation Psi (Mpa)	1379 (9.5)

Unless otherwise noted, all tests were conducted at room temperature 73℉（23℃）. Values shown were determined on 0.075in（1905mm） thick extruded strip,0.075in（1905mm）thick molded ASTM plaques or molded ASTM durometer buttons.

訂貨信息：

型號	英制 內外壁，英寸	公制 內外壁，毫米	每卷 長度(米)
AAB00002	1/16x1/8x1/32	1.6x3.2x0.8	15
AAB00003	1/16x3/16x1/16	1.6x4.8x1.6	15
AAB00004	3/32x5/32x1/32	2.4x4x0.8	15
AAB00005	3/32x7/32x1/16	2.4x5.6x1.6	15
AAB00006	1/8x3/16x1/32	3.2x4.8x0.8	15
AAB00007	1/8x1/4x1/16	3.2x6.4x1.6	15
AAB00009	5/32x7/32x1/32	4x5.6x0.8	15
AAB00010	5/32x9/32x1/16	4x7.2x1.6	15
AAB00011	3/16x1/4x1/32	4.8x6.4x0.8	15
AAB00012	3/16x5/16x1/16	4.8x8x1.6	15
AAB00013	3/16x3/8x3/32	4.8x9.6x2.4	15
AAB00014	3/16x7/16x1/8	4.8x11.1x3.2	15
AAB00016	1/4x5/16x1/32	6.4x8x0.8	15
AAB00017	1/4x3/8x1/16	6.4x9.6x1.6	15
AAB00018	1/4x7/16x3/32	6.4x11.1x2.4	15
AAB00019	1/4x1/2x1/8	6.4x12.7x3.2	15
AAB00022	5/16x7/16x1/16	8x11.1x1.6	15
AAB00023	5/16x1/2x3/32	8x12.7x2.4	15
AAB00024	5/16x9/16x1/8	8x14.4x3.2	15
AAB00027	3/8x1/2x1/16	9.6x12.7x1.6	15
AAB00028	3/8x9/16x3/32	9.6x14.4x2.4	15
AAB00029	3/8x5/8x1/8	9.6x16x3.2	15
AAB00034	7/16x11/16x1/8	11.2x17.6x3.2	15
AAB00036	1/2x5/8x1/16	12.7x16x1.6	15
AAB00037	1/2x11/16x3/32	12.7x17.6x2.4	15
AAB00038	1/2x3/4x1/8	12.7x19.1x3.2	15
AAB00046	5/8x7/8x1/8	16x22.4x3.2	15
AAB00051	11/16x15/16x1/8	17.6x24x3.2	15
AAB00053	3/4x1x1/8	19.1x25.4x3.2	15
AAB00059	7/8x1-1/8x1/8	22.2x28.6x3.2	15
AAB00062	1x1-1/4x1/8	25.4x31.8x3.2	15
AAB00064	1x1-3/8x3/16	25.4x35x4.8	15
AAB00065	1x1-1/2x1/4	25.4x38.2x6.4	15
AAB00069	1-1/4x1-1/2x1/8	31.8x38.2x3.2	15
AAB00070	1-1/4x1-5/8x3/16	31.8x41.6x4.8	15
AAB00071	1-1/4x1-3/4x1/4	31.8x44.6x6.4	15
AAB00073	1-1/2x1-7/8x3/16	38.2x47.8x4.8	15
AAB00074	1-1/2x1.9x1/4	38.2x47.8x6.4	15
AAB00076	1-3/4x2-1/4x1/4	44.6x57.4x6.4	15
AAB00078	2x2-1/2x1/4	50.8x63.6x6.4	15
AAB00079	2x2-3/4x3/8	50.8x70x9.6	15
AAB00080	2x3x1/2	50.8x76.4x12.8	15
AAB00081	2-1/4x2-3/4x1/4	57.4x70x6.4	15
AAB00082	2-1/2x3x1/4	63.6x76.4x6.4	15
AAB00083	3x3-1/2x1/4	76.2x89.2x6.4	15

廣州市賽拓儀器科技有限公司代理經銷法國圣戈班Saint-Gobain軟管，Tygon管，型號齊全，大部分型號有現貨，訂購前請詳細溝通使用場景、貨期、售價等信息。